Nandi Machinery

NM PBR 2040 Hydraulic Press Brake Machine are highly productive, accurate, and economical. Through advanced design and construction, Nandi Machinery offers quality Hydraulic Press Brakes that provide simplified and easily accessible controls for optimum operator efficiency and output. These press brakes are manufactured to high standards of lifetime durability and precision accuracy. Pair of hydraulic cylinders is synchronized mechanically by a heavy-duty torque tube construction. This facility ensures absolute parallelism between ram and table working surface.

Standard Accessories Including Machine:

• Pair of Blade & Block installed with machine.
• Operator Console & Foot switch for easier operation.
• Centrally Lubrication System installed in Machine
• Flexible sheet support for longer and heavier plates/sheets.

Technical Features:

•  Accurate Right Angle welded steel frame with tested material gives accurate bending.
•  Five piece guide sliding device for accurate vertical movement of RAM.
•  Adjustable Pressure Relief/Controlling Valve for HT material.
•  Use of hardened pin and bushes gives less maintenance.
•  Flexible sheet support for longer and heavier plates/sheets.
•  Emergency stop push switch with movable console including motor on/off, RAM up/ down & cycle selection switch.
•  Centrally lubrication system by Hand pump at all pin, bushes and joints.
•  Accurately Synchronized cylinders for equally vertical force of RAM at full length.
•  Six way V- Block in one and suitable Blade.
•  Fine stroke adjustment Rod with limit switches

A Press Brake is a machine tool for bending sheet and plate material, most commonly sheet metal.it forms predetermined bends by clamping the work piece between a matching die and punch. NC hydraulic Press brakes are economical and very reliable solution for industry demand. NM NC PBR 520 Hydraulic Press Brake Machine are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen. The program gives facility to bend different bending degrees,different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive.

NC System for X-Axis or X & Y-Axis:

• Cybelec 8P & Delem Controller.
• Ballscrew Backguage & Servomotor.
• Timing Belt – Pully System.
• Finger Guard.

 Advantages of NC System:

• 8” Touch screen Press brake controller from CYBELEC Switzerland.
• Quick changeover for sample production & mass production.
• High-speed back gauge movement by AC servo drive.
• Programmable angle correction & back gauge correction.
• User friendly Colour Touch screen for easy programming.
• Two axis automatic control – bending degree (Y Axis) & back gauge (X-Axis) program.
• Multiple bends with different back gauge positions can be programmed.
• 200 programs & 24 bends with individual back gauge positions in one program.
• Different 50 punches and Dies can be stored.
• The back gauge repeated position accuracy within ±0.1mm.

 Standard Accessories Including Machine

• NC Control System installed in machine
• Pair of Blade & Block installed with machine.
• Operator Console & Foot switch for easier operation.
• Centrally Lubrication System installed in Machine
• Flexible sheet support for longer and heavier plates/sheets.

Additional Information:

• Delivery Time: 30 days

CNC Synchro Press Brake Machine are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen. The CNC Control is used for Three Axis Control or more.

• Synchronized Ram Axis – Y1 & Y2
• Back Gauge Axis – X
• Optional Axis – R & Z

The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and it can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive.

Technical Specification:

• World class dedicated controller from Delem or Cybelec.
• 3 or more axis control i.e. Ram axis Y1,Y2 & Back gauge axis X.
• Bending angle & Depth Mode Program.
• Highly Precise press brake scale for Y1, Y2 axis.
• Close loop proportional hydraulics for ram synchronization.
• Zero leakage sealing of hydraulic cylinders.
• Hardening & Grinding Multi V Die & Punch.
• Manual Anti deflection unit in punch.
• Quick release die clamps.
• Highly Precise proportional valve to control accurate beam movement.
• The power pack is supplied by Hoerbiger Germany.
• Back gauge consist of hardened & ground ball screw, liner motion bearings and AC servo drive for accurate position up to 0.05 mm.

Additional Information:

• Production Capacity: 5
• Delivery Time: 30 days
• Packaging Details: Plastic

Additional Information:

• Delivery Time: 30 days
• Packaging Details: Plastic

Nandi Machinery Hydraulic Press Brakes are highly productive, accurate, and economical. Through advanced design and construction, Nandi Machinery offers quality Hydraulic Press Brakes that provide simplified and easily accessible controls for optimum operator efficiency and output.

Additional Information:

• Delivery Time: 30 Days
• Packaging Details: Plastic

Additional Information:

• Item Code: PBR
• Production Capacity: 10 nos
• Delivery Time: 30 days
• Packaging Details: Plastic Wrapped.

Nandi Machinery Hydraulic Press Brakes are highly productive, accurate, and economical. Through advanced design and construction, Nandi Machinery offers quality Hydraulic Press Brakes that provide simplified and easily accessible controls for optimum operator efficiency and output.

The Numeric Control is used for Two Axis Control,  

1. Back Gauge Axis - X 

2. Ram Axis - Y

The program gives facility to bend different bending degree, different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Fingers Guard, Ball Screw & Linear Bearing along with drive.

Range: 30MT to 600MT | Length: 1250 mm to 8000 mm

NC System for X-Axis or X & Y-Axis

·         Cybelec 8P & Delem Controller.

·         Ball screw Backguage & Servomotor.

·         Timing Belt – Pully System.

·         Finger Guard.

 Advantages of NC System

·         8” Touch screen Press brake controller from CYBELEC Switzerland.

·         Quick changeover for sample production & mass production.

·         High-speed back gauge movement by AC servo drive.

·         Programmable angle correction & back gauge correction.

·         User friendly Color Touch screen for easy programming.

·         Two axis automatic control – bending degree (Y Axis) & back gauge (X-Axis) program.

·         Multiple bends with different back gauge positions can be programmed.

·         200 programs & 24 bends with individual back gauge positions in one program.

·         Different 50 punches and Dies can be stored.

·         The back gauge repeated position accuracy within ±0.1mm.